93490-3W110 Clock Spring Airbag Spiral Cable For Hyundai
Specification:
Model Number: 93490-3W110
Part Name: Clock Spring
Suitable car: Hyundai Elantra
Year.: 2004-2016, 1989-2016, 2005-2010
Size: Standard Size
Warranty: 12 months
Stocks: Available
Packing: Neutral Packing
Condition: 100% new
Matching car information:
Suitable for : FOR HYUNDAI SONATA ELANTRA 2011 2012 2013 2014
More Popular Product :
What is the clock spring ?
An airbag clock spring is used to connect the steering wheel to
other electrical devices such as the airbag safety system, radio
volume and station selections, horn and cruise controls. A clock
spring can become faulty when wires become worn and break causing a
short or open circuit. This can cause the airbag warning light to
come on. Horn, radio controls and cruise controls can also stop as
well.
What is the Symptoms of a bad clock spring?
Here is a list of some of the most common problems :
Airbag light is on: The airbag or SRS light turning on. A common
problem often caused by a defective clock spring. If you scan the
airbag system using a diagnostic scanner you may get any of the
following errors:
Driver Airbag Squib Circuit High Resistance
Airbag circuit resistance too high
Driver Side Air Bag Circuit High Resistance or Open
Driver squib circuit open!
What is the locations of clock spring?
The clock spring is located in the steering column and is mounted
right underneath the steering wheel. The clock spring has wires
that connect to the airbag and steering wheel buttons and on the
opposite side has an electrical wire harness plugged into it.
How do we confirm that clock spring is in the zero position during
transportation and installation?
There are several types of clock springs. Each type has a different
way of neutral position. Generally, the label or plastic parts on
the clock spring will write it. Generally, it is written that the
inner ring of the clock spring is rotated clockwise (or
counterclockwise, which is related to the design) to the end, and
then how many turns are reversed (2, 2.5, and 3 are possible) to
make the plastic The two shell centering symbols are aligned,
expressed as a neutral position, which is the zero position you
say. Be sure to read the alignment instructions on the clock
spring!
FAQ:
1. Do you receive sample order?
Yes, we do.
2. Can you produce according to the samples I offer you?
Yes, we can produce by your samples or technical drawings. We can
build the molds and fixtures.
3. What's the warranty policy?
12 months
4. What’s the location of your company?
Our company is located in Guangzhou,China
5. How to get a quotation?
Please kindly advice the OE number, color, picture, VIN, .etc and
send your email to us.
CONTACT US:
Contact Person: Miss. Jane
Tel: +8615002030283
